فراغ شاحنة MAN TGA 26.390 6x2 Kroll Combi vacuum opbouw met water terugwin systeem

More options:

• Reversing camera

Kroll suction / coil build-up with water recovery installation

Content total 14,000 liters

Expression shot

VACUUM PUMP:

Make Gardner-Denver-Wittig

Type Aqualine 2700

Flow rate 2,075 m3 / h at 60% vacuum (400 mbar)

Maximum vacuum 80% (200 mbar)

Speed ​​1,500 min-1

Drive power 84 kW at 0.5 bar operating pressure

Mounting: low-maintenance side of the subframe

Drive: elastic, via cardan shafts and V-belts and pneumatically switchable

Friction clutch.

Cooling: approx. 1,000 l process water tank, cooler with fan 24 V, circulating pump

and thermal switch.

HIGH PRESSURE PUMP:

System Three-plunger press pump

Manufacturer URACA

Type P3 - 45

Plunger Dia. 70 mm ceramic coated

Delivery rate 473 l / min.

Pressure 150 bar

Drive power 130 kW

Drive speed 1,800 min-1

Gear ratio 3.13

Crankshaft speed 575 min-1

Mounting: low-maintenance on the side of the subframe, pumpheads on the outside.

Drive: elastic, via cardan shafts and V-belts and pneumatically switchable

Friction clutch.

LARGE TUBING HASP:

firmly connected to the suction hose boom at the end, transversely at the end,

hydraulically tiltable and lockable by 180 °, stepless hydraulic

Drive in both directions, designed for 250 m HD hose DN 32 (1 ¼ "),

complete with 240 m high pressure synthetic hose (Nylaflex) 1 ¼ "

Parker Red Snake. In addition with freewheel device with accordingly additional.

Switch and hydr. Bypass.

SMALL TUBING HASP:

Rear right, hydraulically operated, designed for 60 m

(½ ") HD hose DN 13, complete with 60 m (½") HD hose DN 13.

With freewheel device via switch and hydr. Bypass.

CONTAINER WITH CLOSURE FLOOR:

cylindrical, casing wall thickness 6 mm, outer bottoms in dished form

made of sheet steel S235JRG2 (St. 37.2) electrically welded

Sealing of the closure bottom with profile seal in oil-ester version.

Capacity 13,000 l air volume perm. Tank overpressure -1 / 0.5 bar

Vacuum designed for 100%

Test pressure 0.65 bar

Calculation temperature 20 ° / 50 ° C

Contents display:

Water chamber: one tube sight glass left and right with

appropriate scaling for piston positions.

Mud chamber: one tank contents indicator with PE ball

and outer display left and right.

CLOSURE BOTTOM:

with two laterally arranged hydraulic cylinders across the entire cross section

to open upwards. Securing the raised bottom of the lock:

hydraulically via a single-acting pilot operated check valve in each

Cylinder installed.

CONTAINER SUBDIVISION:

the pneumatically actuated Ausschubkolben also serves to divide the

Container in water and mud chamber, the extension piston is from

lock manually with single locking by hand, leaving two

Piston positions result in varying the water chamber or the

Allow mud chamber.

• Model year: 2018
• Cab: day
• Front axle: Tyre size: 385/65-22.5; Max. axle load: 8000 kg; Tyre profile left outer: 50%; Tyre profile right outer: 50%
• Rear axle 1: Tyre size: 315/80-22.5; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Reduction: single reduction
• Rear axle 2: Tyre size: 315/80-22.5; Max. axle load: 7500 kg; Tyre profile left outer: 50%; Tyre profile right outer: 50%
• Number of cylinders: 6
• Make of bodywork: Kroll
• General condition: good
• Technical condition: good
• Visual appearance: good